Đăng nhập
 
Tìm kiếm nâng cao
 
Tên bài báo
Tác giả
Năm xuất bản
Tóm tắt
Lĩnh vực
Phân loại
Số tạp chí
 

Bản tin định kỳ
Báo cáo thường niên
Tạp chí khoa học ĐHCT
Tạp chí tiếng anh ĐHCT
Tạp chí trong nước
Tạp chí quốc tế
Kỷ yếu HN trong nước
Kỷ yếu HN quốc tế
Book chapter
Bài báo - Tạp chí
2015 (2015) Trang: Open access
Tạp chí: Advances in Materials Science and Engineering

This research presents the engineering performance and the microstructural characterization of eco-friendly construction bricks that were produced using a binder material made from a mixture of class-F fly ash (FA) and residual rice husk ash (RHA). Unground rice husk ash (URHA) was used as a partial fine aggregate substitute (0–40%). The solid bricks of 220×105×60 mm in size were prepared by mixing FA and RHA with an alkaline solution and fine aggregates; formed by compressing the mixture in a steel mold under 35 MPa of forming pressure; and then cured at 350C and 50% relative humidity until the required testing ages. The tests of compressive strength, water absorption, and bulk density were conducted in accordance with relevant Vietnamese standards in order to estimate the effect of the URHA content on the engineering performance of the hardened bricks. Scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR) were performed to determine the microstructure and the phase composition of the brick samples. The results show that properties of these bricks conformed to relevant Vietnamese standards. Therefore, FA and RHA are potential candidate materials for producing eco-friendly construction bricks using geopolymerization technology.

Các bài báo khác
7(3) (2018) Trang: 233–237
Tạp chí: International Journal of Structural and Civil Engineering Research
2 (2015) Trang: 1-4
Tạp chí: International Journal of Advances in Mechanical and Civil Engineering
754-755 (2015) Trang: 468-472
Tạp chí: Applied Mechanics and Materials
2015 (2015) Trang: 623-626
Tạp chí: Green Building, Materials and Civil Engineering
 


Vietnamese | English






 
 
Vui lòng chờ...